Why 118° Is the Most Trusted Drill Bit Angle in the World

By Anne FuUpdated Nov 7, 20264 min read

Short Answer

118 degrees has long been the default point angle for twist drill bits because it spreads cutting force evenly, cuts clean holes and wears evenly in aluminum, mild steel, non-ferrous metals and plastics. It is a poor fit for hard materials: for cast iron or hardened steel, a flatter 135 or 140 degree point reduces tip pressure and slows wear. Buyers should state the point angle for each material when specifying HSS drill bits.

Key Takeaways

  • A 118 degree point is the classic choice for aluminum, mild steel, non-ferrous metals and plastics, where it feeds fast and clears chips well.
  • For cast iron or hardened steel, switch to a flatter 135 or 140 degree point, which spreads the load and reduces tip pressure and wear.
  • A sharp 118 degree tip can burn out quickly in tough materials such as tool steel.
  • Besides the point angle, check the helix angle for chip removal, the chisel edge angle for centering and the clearance angle for heat buildup.
In this article

Let’s Start With a Question:

Why do so many professional machinists, engineers, and manufacturers still use 118° point angle drill bits—even when technology now allows for dozens of variations?

It’s not because they don’t know better. It’s because they do.

The 118° angle has become the global standard not by accident—but by decades of real-world performance, practical engineering, and factory floor proof.

If you’re sourcing HSS drill bits, this article might save you from costly errors—and help you ask smarter questions before placing your next bulk order.

Why 118° Is the Gold Standard for HSS Drill Bits

Sourcing drill bits for your brand?

FirstRate makes HSS, masonry and wood drill bits in Changzhou, China, with your logo and packaging. Free samples for accessories. Tell us your sizes and market and we reply within 24 hours.

Get a QuoteSee our drill bit range →

A Legacy Forged in Steel and Sweat

Let’s rewind the clock to the early 1900s.

Manufacturers didn’t have CAD software. No simulations. No advanced cutting models. Just real tools, real metal, and real problems.

So, they did something clever. They picked one drill point angle that worked well for most applications—an angle that cut clean, wore evenly, and was easy to produce.

That angle? 118 degrees.

It simplified manufacturing. It reduced inspection errors. It worked on aluminum, steel, plastics—and everything in between.

That’s how the 118° drill bit became the industry’s default setting. Not because it was perfect. But because it worked.

Why 118° Is the Gold Standard for HSS Drill Bits A Legacy Forged in Steel and Sweat

Form Meets Function: Why 118° Just Works

Here’s the engineering truth:

  • A 118° point angle spreads the cutting force evenly.
  • It reduces friction on the cutting edge.
  • It produces cleaner holes—especially in mild steels and non-ferrous metals.
  • It cuts fast, but doesn’t wear out fast.

This is especially critical in HSS drill bits, where sharpness and longevity are key. A well-made 118° HSS drill will glide through the workpiece with minimal chatter and maximum control.

And in a B2B world, that means fewer rejected parts, fewer line stoppages, and lower costs per hole.

Why 118° Is the Gold Standard for HSS Drill Bits Why 118° Just Works

But Don’t Be Fooled: One Size Does Not Fit All

Yes, 118° is the classic choice. But here’s what savvy sourcing managers know:

Material matters.

  • Drilling aluminum? Stick with 118°. It feeds fast and clears chips like a charm.
  • Cutting cast iron or hardened steel? Switch to 135° or 140°. These flatter tips reduce tip pressure and slow wear.

Why?

Because a sharper tip (like 118°) is perfect for soft materials—but can burn out fast in tough ones. A flatter angle spreads the load better on hard materials.

Think of it like tires. Snow tires in summer won’t do you any good. Neither will a 118° bit on tool steel.

Here’s What the Best Buyers Do

The best sourcing managers don’t just order drill bits by the thousands. They specify the angle.

They ask questions like:

  • “What’s the point angle on these HSS drill bits?”
  • “Can we get a flatter angle for our castings?”
  • “Is this angle optimized for aluminum feed rates?”

And they get answers from real factories—not middlemen.

A Quick Look at What Makes Up a Drill Bit

The point angle is just the beginning.

There’s also:

  • The helix angle (controls chip removal)
  • The chisel edge angle (impacts centering)
  • The clearance angle (affects heat buildup)

But if you only remember one thing, remember this:

“The point angle is the heartbeat of your drill bit. If you get it wrong, everything else goes wrong.”

Why We Stick to 118° (Unless You Tell Us Otherwise)

At FirstRate Tools, we’ve been manufacturing power tool accessories for over 15 years. We’ve supplied clients in Europe, America, and Southeast Asia who depend on our HSS drill bits to perform under pressure.

Our default HSS drill bit uses the 118° angle—because it’s the smartest balance between sharpness, durability, and versatility.

But we don’t stop there.

Need a 140° bit for high-strength alloys?
Want a private label line with 130° tips for woodworking applications?
Looking to fine-tune your tooling based on real production data?

We’ve done it all.

The Bottom Line

The 118° angle isn’t just a design feature—it’s a legacy of what works. It’s the result of decades of hands-on engineering and global manufacturing success.

If you’re buying HSS drill bits and not asking about point angles, you’re flying blind.

For the point styles, bit types and set formats we supply, see our drill bits page.

But if you’re working with a manufacturer who understands these angles, who adjusts based on your material needs, and who produces under CE/UL/ISO certifications—you’re in good hands.

That’s the kind of partner we aim to be.

Why 118° Is the Gold Standard for HSS Drill Bits The Bottom Line

Ready to Talk Drill Bits?

📞 Let’s discuss your next project—whether it’s OEM production, private label, or bulk sourcing for distribution.
🛠️ We’ll help you choose the right angles for the right materials—so you can drill smarter, not harder.

Portrait of Anne Fu, FirstRate Tools manager

About the author

Anne Fu

General Manager, FirstRate

Anne has spent more than 15 years in power tool and hand tool export. She works with importers, distributors and retail brands on model selection, certification, packaging and order planning.

Questions about this topic or your next order? Ask Anne. She replies within 1 business day.

In this article

Need a Quote?

Tell us your market, the product and specs you need, and a rough quantity.

Get a Quote

More Articles on This Topic

Leaf blower CFM vs MPH explained: air volume vs air speed, why input watts are not airflow, unit conversions, and what to check before…

String trimmer line sizes in mm and inches by type of trimmer, plus line shapes, bump vs auto feed, spools and what to specify…

Segmented, turbo or continuous rim? How each diamond blade cuts, which materials it suits, EN 13236 markings, sample checks and which rims to stock…

Planning a Tool Line or Your Next Order?

Tell us your market, the product and specs you need, and a rough quantity. We reply within 1 business day with options, prices and sample terms.

Get a Quote
Tell Us What You Need

Your market, the product and a rough quantity are enough to start. We reply within 1 business day.

🔒 We never share your details. Files? Email them to info@firstrate-tools.com

Portrait of Anne Fu, FirstRate Tools manager

Anne Fu

General Manager, FirstRateGeneral Manager · replies within 1 business day

I’ll reply with suitable models, pricing and lead times.

Online 9:00–21:00 Beijing time (GMT+8)

Get the Product Catalog

Leave your email and we’ll send the catalog within 1 business day, with notes on logo, color and packaging options.

🔒 We never share your details.

Portrait of Anne Fu, FirstRate Tools manager

Anne Fu

General Manager, FirstRateGeneral Manager · replies within 1 business day

Tell me your market and I’ll help you shortlist suitable models.

Online 9:00–21:00 Beijing time (GMT+8)