Многофункциональный вращающийся инструмент S1J-AJ6-10

Многофункциональный вращающийся инструмент

Модель №: S1J-AJ6-10

This 135W Rotary Multi Tool is a corded rotary tool designed for detailed work with adjustable speed control. With an 8,000–33,000 rpm no-load speed range and 2.4 mm and 3.2 mm chuck options, it provides a defined specification for bulk purchasing and private-label product programs.

Параметр

Напряжение/Частота:

230В/50Гц

Власть:

135 Вт

Скорость холостого хода:

8000-33000 об/мин

Диапазон патронов:

2,4 мм, 3,2 мм

КОЛ-ВО/КОРОБКА:

10шт

ГВ/СЗ:

16/15КГ

МЭС:

44x31x38CM

20'GP/40'GP/40'HQ:

5800/12000/14000ШТ.

Performance and Build Details

135W Corded Power

The 135W rated power and 230V / 50Hz electrical specification define the tool's power class and intended supply requirements. These parameters help importers and distributors evaluate the model against the electrical requirements of their target markets.

8,000–33,000 rpm Speed Range

The no-load speed range of 8,000–33,000 rpm provides a basis for selecting operating speeds according to the accessory and workpiece. Actual working speed and suitability depend on the material, accessory type, and operating conditions.

2.4 mm and 3.2 mm Chuck Range

The specified 2.4 mm and 3.2 mm chuck options provide two shank-size choices for accessory configuration. The final accessory kit should be checked against the confirmed chuck specification to ensure that the selected accessories fit correctly.

Accessory Configuration

The tool can be evaluated with different accessory configurations according to the intended product program. The final accessory types, quantities, and included components should be confirmed after kit configuration approval rather than assumed from product images.

Operating Boundary

The supplied specifications do not establish a continuous-duty rating or maximum material-removal capacity. Suitability for demanding workloads and prolonged operation should therefore be confirmed through sample evaluation under the intended working conditions.

Best Fit For

Program NeedFit
Add a rotary tool to an existing catalogProvides a defined 135W corded model for expanding an existing rotary tool range.
Supply hardware and DIY retail channelsOffers clear electrical, power, speed, and chuck specifications for product selection and catalog planning.
Build an e-commerce listingThe documented parameters support product descriptions, specification tables, and listing preparation.
Develop a private-label SKUProvides a model specification for sample evaluation and product-range planning.
Expand an existing power tool rangeCan be assessed as an additional rotary tool option alongside other power tool models.

Supply Options

This 135W Rotary Multi Tool can be supplied in different configurations, subject to confirmation before sample preparation.

Supply OptionКонфигурация
Bare ToolMain tool only, subject to confirmation of standard packing contents.
Basic KitMain tool with selected basic accessories, to be confirmed after kit configuration approval.
Accessory KitMain tool with a selected accessory set based on the approved accessory list.
Private-Label KitCustomized color box, logo, manual, labels, barcode, and carton markings, subject to confirmation.
Варианты упаковкиStandard or customer-specific packaging, to be confirmed after packing plan approval.

Accessory quantities, packaging contents, and labeling requirements should be confirmed before sample preparation and bulk production.

Suitable Applications

  • Cutting and trimming with suitable rotary accessories
  • Grinding and deburring
  • Sanding and surface finishing
  • Engraving and detailed craftwork
  • Polishing and cleaning with compatible accessories
  • Small drilling tasks using suitable bits
  • DIY repair and general maintenance
Application note: Final suitability depends on the workpiece material, selected accessory, chuck compatibility, and operating conditions. Specific applications should be validated through sample testing where necessary.

Product-Specific Testing

The following inspection points can be confirmed according to the approved sample and order requirements.

  • Start-up and operating function
  • No-load speed verification
  • Switch function
  • Chuck operation and accessory fit
  • Housing and external appearance inspection
  • Accessory completeness and packing inspection
  • Nameplate and product specification consistency
The actual inspection scope and acceptance criteria should be confirmed before production. These are proposed product-specific inspection points, not a claim that every test has already been performed.

Product FAQ

Can the S1J-AJ6-10 be supplied as a bare tool or a kit?

Bare-tool and kit configurations can be discussed. The final accessory list and standard packing contents should be confirmed before sample preparation.

Can the chuck sizes and accessory configuration be confirmed for our order?

The stated chuck range is 2.4 mm and 3.2 mm. The final chuck arrangement and compatible accessory selection should be confirmed against the approved sample and kit configuration.

What is the MOQ for this 135W Rotary Multi Tool?

The stated MOQ is 500 pcs. Any specific requirements for branding, accessory configuration, or packaging should be included in the quotation request.

What are the sample and production lead times?

The stated sample lead time is 10–15 days, and the production lead time is 45–60 days. Final timing depends on sample approval, kit configuration, packaging requirements, and production scheduling.

Can the product packaging and documentation be customized?

Logo application, color box design, manuals, labels, and carton markings can be discussed for the order. Final artwork, documentation, and packaging details should be approved before production.

Request a Quote for the 135W Rotary Multi Tool

If you are sourcing the S1J-AJ6-10 for bulk or private-label supply, send us your target market, expected order quantity, preferred accessory configuration, and packaging requirements.

Отправить запрос

Сопутствующие товары:

Tell Us What You Need

Your market, the product and a rough quantity are enough to start. We reply within 1 business day.

🔒 We never share your details. Files? Email them to info@firstrate-tools.com

Портрет Энн Фу, менеджера FirstRate Tools

Anne Fu

General Manager, FirstRateGeneral Manager · replies within 1 business day

I’ll reply with suitable models, pricing and lead times.

Online 9:00–21:00 Beijing time (GMT+8)

Get the Product Catalog

Leave your email and we’ll send the catalog within 1 business day, with notes on logo, color and packaging options.

🔒 We never share your details.

Портрет Энн Фу, менеджера FirstRate Tools

Anne Fu

General Manager, FirstRateGeneral Manager · replies within 1 business day

Tell me your market and I’ll help you shortlist suitable models.

Online 9:00–21:00 Beijing time (GMT+8)