
If you are launching or expanding a private-label cordless range, the first decision is not which drill to buy. It is which battery platform every future tool will run on. The battery, the charger and the tool interface lock in your spare-parts plan, your kit pricing and what you can add in two years’ time.
This guide explains how importers and brand owners can choose a 20V platform, build a starter lineup, configure kits, check a platform supplier and send a quote request that gets an accurate answer.
Short Answer
Choose the battery platform before choosing models. A good 20V platform for an importer has:
- one battery family that fits every tool you plan to sell, in at least two capacities
- chargers in the voltage and plug versions your markets need
- a starter lineup of five or six tools that covers drilling, fastening, cutting and grinding
- a supplier who will keep the battery interface unchanged, supply spare packs, and provide transport and safety documents for each battery model
Then confirm each tool’s specification, certification and kit contents model by model. Do not assume one model’s documents cover the rest of the range.
Why the Battery Platform Matters More Than the First Tool
A single tool is a one-off sale. A platform turns that sale into a series. Once an end user owns your battery, the next tool from your range is the easier choice.
For an importer, the commercial effects are practical:
- Repeat orders. A customer who bought your 20V drill is a natural buyer for your impact wrench, grinder or circular saw.
- Simpler stock. Two or three battery SKUs and two chargers can serve the whole range instead of a separate battery for every product.
- Kit flexibility. The same tools can be sold bare, as single kits or as combos, simply by changing what goes in the box.
- Lower after-sales cost. Fewer battery and charger types mean fewer spare parts and simpler support.
The risk works the other way too. If a supplier later changes the battery interface, or you source tools from two factories with different packs, your customers end up with batteries that do not fit their next purchase.

20V, 18V and 21V: One Battery, Different Labels
Most “20V” tool batteries use five lithium-ion cells in series. “20V Max” describes the maximum voltage of a fully charged pack with no load; “18V” describes the nominal voltage of the same pack. The label you use depends on the market. In our research, 20V is the common label in the United States and Canada, 18V in the United Kingdom and Australia, and 21V is common in Mexico.
For a private-label brand, the practical point is consistency. Choose one label per market, use it on the tool, the battery, the packaging and the listing, and add “18V nominal” where your market or retailer expects it. Have the exact battery label wording reviewed for each country you sell in. For the voltage arithmetic, the watt-hour rule and label wording by market, see 18V vs 20V vs 21V: same battery, different labels.
If you also plan a 12V compact line, treat it as a separate platform. 12V and 20V tools use different battery packs and chargers.
What a 20V Platform Includes
Before comparing tool prices, map the parts of the platform you will have to stock and support. The table shows what to decide for each part and uses FirstRate’s B2 battery platform as an example.
| Platform part | What to decide | Example: FirstRate B2 platform |
|---|---|---|
| Battery packs | Which capacities to offer and which tools each one suits | B2-2020: 2.0 Ah, 36 Wh · B2-2040: 4.0 Ah, 72 Wh · B2-2050: 5.0 Ah, 90 Wh; battery capacity can also be made to your requirements |
| Chargers | Charging speed, input voltage, plug type | C2-2024 (2.4 A output) and C2-2040 (4.5 A output); 200–240 V 50 Hz or 120 V 60 Hz for North America; plug for your market |
| Core tools | Which tools launch first and which come later | Hammer drills, impact drivers, impact wrenches, angle grinders, circular saws, rotary hammers, garden tools |
| Documents | What each battery and tool needs to ship and sell | MSDS and UN38.3 documents for batteries; tool certification confirmed per model |
| Spare parts | How end users will replace batteries and chargers | Batteries and chargers can be quoted separately as spare packs |
The conclusion: a platform is a battery-and-charger system first and a list of tools second. If a supplier cannot show you the full battery and charger range, its versions by market and its documents, you are buying individual tools, not a platform.
On the FirstRate B2 platform, one pack runs each tool, with one exception: the CH2016X2 16″ chainsaw runs on two 20V packs. Tools like this affect kit contents and battery planning, so ask which tools need more than one pack.
Building a 20V Starter Lineup
A first lineup should cover the jobs your customers do most often with as few models as possible. Five or six tools are usually enough to launch, configure two or three kits, and learn what sells before adding more.
The table shows a common sequence. The models are examples from FirstRate’s 20V range; your lineup should follow your channel and customers.
| Stage | Tools | Why at this stage | Example FirstRate 20V models |
|---|---|---|---|
| Launch | Hammer drill, impact driver | Highest-demand pair; the core of most kits | CD2050TC (50 N·m), CD2080T (80 N·m), CD2135T (135 N·m) hammer drills; IW2025H impact driver |
| Launch | Angle grinder, circular saw | Adds cutting and grinding; gives trade credibility | AG2125S angle grinder (3,000–8,500 rpm variable speed); CS2165 circular saw |
| Launch or second stage | Impact wrench | Automotive, construction and fastening customers | IW2038S/H impact wrenches |
| Second stage | Rotary hammer | Customers who drill concrete often | RH2022 rotary hammer |
| Second stage | Garden tools | Seasonal demand on the same battery | GT2300 grass trimmer, BV2003 leaf blower |
Treat this as a plan, not a fixed schedule. Add the next stage when your first tools reorder steadily and your customers ask for more tools on the same battery. Adding models before the first ones sell spreads your stock and marketing too thin.
Kit Configuration: Bare Tool, Kit or Combo
The same tool can be sold several ways. Decide the configurations before you ask for a quote, because batteries and chargers are often the largest part of a kit’s cost.
| Configuration | Contents | Best use |
|---|---|---|
| Bare tool | Tool only | Customers who already own your battery |
| Single kit | Tool + battery + charger | New customers entering your platform |
| Two-tool combo | Two tools + batteries + charger | The main kit for many retail and e-commerce programs |
| Multi-tool combo | Three or more tools + batteries + charger + bag | Promotions and project kits |
Match battery capacity to the tools in the kit. On the B2 platform, the 2.0 Ah pack suits compact kits and drills, the 4.0 Ah pack suits all-round kits, impact wrenches and grinders, and the 5.0 Ah pack suits high-draw tools such as circular saws, rotary hammers and outdoor tools. A cheaper small pack in a saw kit may make the whole platform look weak to the end user.
Questions That Protect Your Platform
Most platform problems appear one or two years after launch, when you want to add tools or reorder batteries. Ask these questions before the first order.
| Question | Why it matters | What to ask for |
|---|---|---|
| Will the battery interface stay the same for future tools? | A changed interface strands your existing customers | Written confirmation and the list of current tools on the platform |
| Can spare batteries and chargers be ordered separately? | End users need replacements; retailers sell spare packs | Spare-pack pricing alongside the tool quote |
| Which charger versions are available? | Input voltage and plug differ by market | Charger model, input voltage and plug for each destination |
| What happens if cells or electronics change? | A change may affect performance and documents | Change notification before production |
| Which documents come with each battery? | Lithium batteries need transport test documents to ship | MSDS and UN38.3 documents for the exact battery model |
| Which certifications does each tool have? | Certificates are model-specific | The certificate or report for each model and market |
| What is checked in production? | Samples are not the same as bulk | Production inspection steps and test records |
The conclusion: get answers in writing and tie them to model numbers. A platform supplier should be able to answer every row without guessing.
How to Check a Platform Supplier’s Engineering
Datasheets rarely show engineering capability; performance under load does. When comparing platform suppliers, look at:
- Heat — how fast the motor and pack warm up under continuous load
- Torque stability — whether output drops as the pack discharges or heats up
- Noise and vibration — a sign of gearbox alignment
- Battery protection logic — consistent shutdown on overload, overheating and low voltage
Batch variation matters as much as the design. Motor winding, magnet strength, soldering, cell grouping and gearbox tolerances can shift between batches even when the design stays the same. Ask how the supplier tracks results across batches, not only on the approved sample.
A five-step check:
- Confirm the battery platform will stay stable for years.
- Review load-testing methods.
- Ask for batch test records.
- Match voltage, charger and plug to each region.
- Validate with your own samples.
Certification and Shipping Documents
Plan documents by market before you finalize the lineup. Three areas usually matter:
- Tool safety. Hand-held battery tools are commonly assessed to the IEC 62841 series or its national versions, such as UL 62841 in North America.
- Battery safety. Lithium cells and packs are commonly assessed to IEC 62133-2 or market-specific equivalents.
- Transport. Lithium batteries must pass UN38.3 testing before they can be shipped, and carriers ask for the test summary. See IATA’s lithium battery guidance for air transport rules.
Certification is model-specific. One certified drill does not cover a grinder on the same battery, and a 230 V charger certificate does not cover a 120 V version. At FirstRate, most 20V models have UL certification; confirm the certificate for each model and market before you order.

What Can Be Customized for Private Label
For a private-label 20V program, these items are usually set to your brand:
- logo on the tool and battery
- housing color
- color box and packaging
- user manual language and content
- kit contents and carry case
- battery capacity, to your requirements
Tool performance specifications such as torque and speed are fixed by the model. Choose the model that matches your market rather than asking for a different specification.
Common Buying Mistakes
- Choosing tools before the battery. Buyers often start with the cheapest drill quote. If that drill’s battery does not fit the grinder and saw you want next, you end up with two platforms, two sets of spare parts and confused customers.
- Sourcing one platform from two factories. Packs that look similar may not fit or may not communicate correctly with another factory’s tools. The result is returns and a broken promise of compatibility.
- Putting the smallest battery in every kit. A 2.0 Ah pack keeps the kit price low, but in a circular saw or rotary hammer kit it can make the tool feel underpowered and lead to poor reviews.
- Assuming one certificate covers the range. Certificates belong to specific models and versions. Shipping an uncertified model can mean blocked customs clearance or delisting by a retailer.
- Forgetting spare batteries. Without a spare-pack plan, end users who lose or wear out a battery cannot buy a replacement, and the platform stops generating repeat sales.
- Launching too many models at once. A wide first order spreads stock and marketing across slow sellers. Launch the core tools, learn, then expand. Our guide to samples, lead times and first-order planning shows how to size a first order across a 20V range.
Buyer Checklist
- Which tools will run on the same battery, now and later? This defines whether you are buying a platform or a set of unrelated tools.
- Which battery capacities will each kit include? Capacity affects runtime, kit price and how the tool performs in the customer’s hands.
- Which charger input voltage and plug does each market need? North American 120 V and 200–240 V markets need different charger versions and documents.
- What label will you use: 20V, 18V or 21V? Consistent labeling across tool, battery, packaging and listing avoids confusion and compliance questions.
- Which certificates and reports does each model have for your market? Model-level documents decide whether the product can be imported and listed.
- Will the supplier supply spare packs and keep the battery interface unchanged? These two commitments protect your customers’ investment and your repeat sales.
- How will you inspect the first bulk order? Agree on production checks, test records and any third-party inspection before production starts.
What to Send for a Quote
To get an accurate quote for a 20V program, send:
- the tools you want, by type or model number
- destination markets
- battery capacities for each kit
- charger version: input voltage and plug type
- configurations: bare tool, single kit, combo, and what each box contains
- label preference: 20V, 18V or 21V
- logo, color and packaging requirements
- manual language
- required certifications or test reports for each market
- trial quantity and estimated annual quantity
- sample requirements
- inspection requirements
- preferred shipping term: FOB, EXW or DDP
How FirstRate Supports 20V Programs
FirstRate has manufactured power tools in Changzhou, China, since 2009, with five assembly lines and an ISO 9001 quality system. For 20V programs:
- The B2 battery platform covers drills, impact drivers, impact wrenches, angle grinders, circular saws, rotary hammers and garden tools, with 2.0, 4.0 and 5.0 Ah packs and 2.4 A and 4.5 A chargers. The chargers support 1-hour fast charging.
- Every unit is checked before shipment, and every batch goes through endurance testing.
- Samples take 10–15 days; the sample fee is deducted from your bulk order.
- Bulk production takes 45–60 days after sample approval.
- Different models can be combined in one order.
- Shipping terms: FOB Ningbo (preferred) or Shanghai, EXW or DDP. Payment by T/T 30/70 or L/C.
- Every tool is covered by a 12-month warranty.
See the full 20V cordless tool range, the 20V batteries and chargers, or start with the cordless drill range.
FAQ
Are 18V and 20V batteries the same?
In most cases, yes. A “20V Max” pack and an “18V” pack usually use the same five-cell design; 20V is the maximum no-load voltage and 18V is the nominal voltage. The label changes by market.
Can I combine different 20V models in one order?
Yes. Different models can be combined in one order, which lets you launch a full starter lineup without a large quantity of each tool.
Can I order batteries and chargers as spare parts?
Yes. Batteries and chargers can be quoted as kit components or as spare packs alongside your tool order.
Can battery capacity be customized?
Yes. Standard packs are 2.0, 4.0 and 5.0 Ah, and battery capacity can also be made to your requirements. Tool specifications such as torque and speed are fixed by the model.
What is the MOQ for a 20V private-label order?
The MOQ is 500 units per model. Your logo and color box are included at this quantity.
Final Recommendation
Fix the platform first: battery family, chargers by market, the tools that will share them and the documents each model needs. Launch with five or six core tools, configure two or three kits, and expand only when the first tools reorder.
If you are planning a 20V range, send us your target markets, tool list and kit plan, and we will propose a starter lineup with battery and charger options.

